The Spyder T-Board

Compatible with any ESP grip:
32* Icon E
Spyder AMG
Spyder Esprit
Spyder E-99
Spyder Imagine
Spyder Fenix
Spyder Pilot
Spyder Electra

The Spyder T-Board is a substitute control board for all electronic Spyders*. The Spyder T-Board has an unlimited*** firing rate. If the eye is installed, it can be disabled at anytime by holding down the trigger for two sec.

Spyder T-Board Specs:
Uncapped*** firing rate
Tournement legal (Semi-auto only)
Breakbeam or bouncebeam eye option Breakbeam vs. Bouncebeam
Eye can be disabled on the fly (i.e. during play)
Adjustable Eye sensitivity
1 million trigger pull checks per second
Software debounce
Fully adjustable dwell times What is Dwell?
Fully adjustable eye delay
Fully adjustable eye disable time
Saves settings when turned off
Setting to align eye during installation Eye Alignment Tool?
Upgradable Microcontroller
Uses stock charging plug
120 day (4 month) limited warranty against defects
30 day money back guarantee

The IR eye is availiable in both breakbeam and bouncebeam. It is recommended that the eye be installed by a certified airsmith or someone familiar with the operation of the marker. There is also a setting that will aid you with aligning the eye.

Shown to the left is a breakbeam eye installed on an E-99. The IR reciever is on the opposite side of the marker.

The T-board checks for trigger pulls 1 million times per second and has built-in debounce programming.

Comes with instructions and 120 day limited warranty.

NOTES 1: The stock Spyder board will shoot between 4000-7000 balls*, the T-Board w/o the eye will shoot 4000-7000 balls and w/ eye will shoot 3800-6600 balls per battery charge

*(http://www.paintballgunreview.com/spydere99.html)

Windows Media Player
See solenoid fire rate.

AVI
See Gun Firing.