What is Version C?

The Dragun T-Board Ver C is a substitute control board for SEAR firing Dragun Markers only. The T-Board has an unlimited* fire rate and an optional eye. If the eye is installed, it can be disabled at anytime by holding down the trigger for two sec.

Compatible with:
Black Dragun Basic
Black Dragun Compact
Black Dragun Sniper
Black Dragun LCD (can't verify this but lots of sources say there is one)
DragunFly LED
DragunFly LCD
M3 Patriot
M3 DragunFire Compact
M3 DragunFire
Drallion
TES (Not the TES B)


Dragun T-Board Specs:

36bps firing rate
Tournament legal (Semi-auto only)
Breakbeam or bounce beam eye option (will work with stock eye)
Eye can be disabled on the fly (i.e. during play)
1 million trigger pull checks per second
Software debounce
Fully Adjustable dwell time
Fully Adjustable eye delay
Adjustable eye sensitivity
Setting to align eye during installation (Eye Alignment Tool)
Upgradeable Micro controller
Charging plug (hole must be drilled)
120 day (4 month) limited warranty against defects

The IR eye is available in Breakbeam or Bounce beam. The Dragun T-Board will work with the stock Dragun Bounce beam eye. It is recommended that the eye be installed by a certified air smith or someone familiar with the operation of the marker.

To order eyes, please add them to your cart.
Comes with instructions and 120 day limited warranty.
*ROF is limited by the cycle speed of the marker.

Click Me To Purchase